Husky G300 RS70/60

[Goatboy]

Ok

On the husky G300 series I am being told by my "seniors" that no mater what the screen says the machine still atains it's hold, for example... A shot of 98mm with a switch over of 7mm. If the cusion is 8.9mm does the machine actualy still switch over to hold time and PSI or does the fact that it nerver reaches its switch point mean that it is all pure Injection PSI

I think if it dosn't hit the point it then there is not switch

Who's right???

[M&M]

You could be reaching the 7mm transfer point and boucing backwards to the 8.9mm cushion. Pretty typical when your doing squeeze molding.....

[oldtool]

Slam em, jam em, & ship em.

[Louis]

Slam em, jam em, & ship em.

Don't you need to "stack & pack" first? :