all injection, all the time

Moderator: Will Call


Postby plastoc on Tue Mar 13, 2012 9:34 am

I was looking for a cheap antistat for P.P.. The parts are sticking to the a side because of static. An air blast will help.
Posts: 35
Joined: Mon Nov 01, 2010 1:00 pm

Re: Antistat

Postby rickbatey on Wed Mar 14, 2012 3:16 am

Tried a drier sheet on the parts? Cheapest thing I've found so far.
That or one of the anti-stat air generators.
User avatar
Posts: 599
Joined: Mon May 02, 2005 4:21 pm

Re: Antistat

Postby Louis on Thu Mar 15, 2012 1:39 pm

Good one Rick, it has worked in the past for me.

Recent news though on those sheets that you place in the drier with your clothes indicates that they block the lint filter from working causing overheating. That, even after all the lint is removed; something about a thin film of an ingredient. I cannot help but wonder if they impart a surface coating to plastic.
My posts represent my opinion and not the ownership of this site.
User avatar
Site Admin
Posts: 4267
Joined: Wed Aug 29, 2001 12:00 am
Location: Allentown, PA USA

Re: Antistat

Postby oldtool on Fri Mar 16, 2012 2:13 pm

I have used antistatic devices for this very situation;

You will need to make a bracket over the mold and attach the device to the top fo the mold using your bracket. Worked great for me.

Good Luck
Status Quo is never good enough.
User avatar
Posts: 398
Joined: Thu Apr 20, 2006 6:26 pm
Location: Streetsboro, Ohio

Return to Injection

Who is online

Users browsing this forum: No registered users and 1 guest