sourcing

all injection, all the time

Moderator: Will Call

sourcing

Postby derek1234 on Mon Apr 16, 2012 12:30 pm

I'm trying to source some parts for a project and wondering if anyone can help.
i have some 5mm O/D 3mm ID pvc clear flexible pipe, i have sourced some straight push on connectors and a "Y" push on connector but i am having trouble sourcing an on off switch/valve. could anyone point me in the right direction.
thanks in advance.
Derek
derek1234
 
Posts: 2
Joined: Mon Apr 16, 2012 12:25 pm

Re: sourcing

Postby Len on Mon Apr 16, 2012 1:58 pm

Try a lab supply house. Miniature ball valve or s t o p c o c k with barbed fitting.

Len
Len
 
Posts: 1051
Joined: Wed Sep 05, 2001 12:00 am
Location: Sandersville, GA

Re: sourcing

Postby derek1234 on Mon Apr 16, 2012 2:40 pm

thank you so much len, i have found a company that does a quarter inch on off valve, and then they do a quarter to eight reducer to connect the pipe.
thanks again for your help. fingers crossed they work.
derek1234
 
Posts: 2
Joined: Mon Apr 16, 2012 12:25 pm


Return to Injection

Who is online

Users browsing this forum: Google [Bot], Yahoo [Bot] and 2 guests

cron