<![CDATA[plastics.com - Articles - Extrusion]]> http://www.plastics.com/content en-us N/A staff@plastics.com Sat, 11 Oct 2008 19:30:15 EDT 20 <![CDATA[PVC Pipe Extrusion Start-up Procedure]]> http://www.plastics.com/content/articles/17/1/PVC-Pipe-Extrusion-Start-up-Procedure/Page1.html

Rigid PVC Pipe: Start-Up

Although this procedure describes CM-80 twin screw pipe extrusion start-up using pressure sizing, many of the same steps are also necessary for any extrusion process, regardless of end product or extruder type.

]]> no@spam.com (Skip Thacker) http://www.plastics.com/content/articles/17/1/PVC-Pipe-Extrusion-Start-up-Procedure/Page1.html <![CDATA[Rigid PVC: Trouble-shooting Guide for Twin Screw Extrusion]]> http://www.plastics.com/content/articles/8/1/Rigid-PVC-Trouble-shooting-Guide-for-Twin-Screw-Extrusion/Page1.html from the hopper, down the barrel, out the die, sizing, cooling, haul-off, and through the saw.

]]> no@spam.com (Skip Thacker) http://www.plastics.com/content/articles/8/1/Rigid-PVC-Trouble-shooting-Guide-for-Twin-Screw-Extrusion/Page1.html <![CDATA[RIGID PVC EXTRUSION: Attributes of single vs.twin screw extruders]]> http://www.plastics.com/content/articles/6/1/RIGID-PVC-EXTRUSION-Attributes-of-single-vstwin-screw-extruders/Page1.html

Understanding the salient differences between single and twin screw extrusion of rigid PVC powder blends is an important part of  a full, overall understanding of  rigid PVC processing technology

]]> no@spam.com (Skip Thacker) http://www.plastics.com/content/articles/6/1/RIGID-PVC-EXTRUSION-Attributes-of-single-vstwin-screw-extruders/Page1.html